Author Topic: Parts Compatibility  (Read 732 times)

Snakehips

  • Twixt London and leafy Surrey
Parts Compatibility
« on: 21 April, 2021, 11:38:47 am »
I have a Cannondale Synapse circa 2014 with a number of knackered drive train components which I am looking to replace. This may or may not be sensible given that it only cost me £500 second hand and has done 11000 miles with little expenditure, and the price/availability of parts at the moment.
Anyway, it's a 2x10 setup with  Shimano 105 FD and RD but FSA cranks and 34/50 T 110 BCD rings. It would seem obvious that a Shimano 105 50T 110 BCD chainring should be a perfect replacement for the outer ring, however I have found that life is rarely that simple and I don't want to blow £45 on the wrong thing.
Has anybody got any relevant experience in this area?

Thanks

Snake
An nescis, mi fili, quantilla prudentia mundus regatur?

Re: Parts Compatibility
« Reply #1 on: 21 April, 2021, 11:53:25 am »
If the shimano ring surface profile is "flat" (later Shimano chainsets had a sculpted profile to them - they'd probably still fit but look odd) then it's fine, but would it not be cheaper to get Spa / TA rings rather than shimano?
We are making a New World (Paul Nash, 1918)

Re: Parts Compatibility
« Reply #2 on: 21 April, 2021, 11:57:56 am »
Ensure they have the same number of bolt holes as well