As it says, really, I'm look for tips on completing my dynamo setup.
SP-PD7
Kemo M172N
Schmidt Edelux II
B&M Toplight Line Brake Plus
My main question is how to connect the Kemo USB. It has some holes, I know that "frame" is on a hiding to nowhere with carbon, just set it up as a common ground. No, my question is actually about the physical connection - do I just jam the cable in there or something?
Next, mounting the toplight. As you can see I have a saddle rail hanger, but it seems loose - came off on the commute this morning. I'd also like a saddlebag. Is there anything that can strap to the seatpost and support an 80 mm spacing? I'm sure I could bodge something together using the loop on the back of my saddlebag, but I do value neatness.
Talking of neatness, cable routing. I'm hoping I'll be able to get a cable to the rear of the bike alongside my internally routed brake line. But the connection from the dynamo to the light (although this will end up being the USB charger) - it's on the wrong side of the frame to do that. Is there any chance that there are 12 mm thru axles with a hole in the middle for a dynamo cable? Again, really just neatness, but I'd rather not use cable ties or have the cable dangling around my wheel.