I have two fixed rear wheels, and intend buying a third today (Goldtec from Betd). The plan is to do some switching about between my Merckx, my track bike and reinstate my Raleigh as fixed to leave at my folks for the odd ride in the Midlands.
To that end, I've been googling to see if I can switch sprockets between wheels. Here's what I have and what I've come up with, and would be grateful if someone in the know could help me fill in some blanks, or correct me where I'm wrong. Ta!
Hub
Mavic (Ellipse wheel) Maillard Goldtec | Sprocket
ISO ? Shimano (ISO?)
| Lockring
French metric 33x1.0mm French metric 33x1.0mm ISO | Chainline
46mm ? (possibly 42mm) 45mm |
Another question: the Maillard hub is obviously somewhat more vintage than the other two. The wheel came with the track bike and has only been used on a velodrome (recently at least). Will the seals cope with outdoor use? Does it even have seals? Or are there more than one type of Maillard hub, some of which are fine and some not (ie get more info Paul)?
Cheers for any info