I bought some Araldite Rapid in the syringe format for work. The glue is absolutely fine, but unlike the picture on the RS website with the two syringes going to separate nozzles, then a little plastic stirrer to mix, it comes with swanky nozzles that do the mixing for you.
Very neat and easy to apply, with precise mixing and just put the end of the nozzle where you need it and squeeze the syringes evenly. But the nozzles fill with a fairly significant (compared to the tube size) volume of epoxy to mix it, and obviously the glue then sets inside so they are effectively single use.
You get two with the tube, and you can buy more at tens of pence each, but it makes the whole thing far more expensive and wasteful if, like me, you'll keep a set for several years using it occasionally for small jobs. I could easily lose more glue in the nozzles than I actually use.
For someone doing big or repeat assembly work in a commercial environment, I can see the advantage. As it is, at work I had two things to glue, but could only do one at a time, so both nozzles gone with about 1/4 of the glue used, the rest is useless until I buy more nozzles.