Are you after plain boring black hose or looking for coloured hose? I have neon green hydraulic hose from Jagwire on my recumbent. It came in a 3m length but not as cheap as above.
3m was enough for front and back hoses. Make sure to use sharp cutters for the hose, makes fitting the connectors so much easier.
Black is fine, as long as it's decent quality housing. The recumbent frame will be matt black and polished alloy (with clearcoat). Is all hydraulic hose the same width/standard? What fittings would I need for those brakes? Thanks
Appears to use the new Shimano easy fit hose system.
Basically the end of the hose you insert a metal connector then an olive and bolt outside. When you insert hose in lever and tighten bolt it crushes the olive onto the hose forming an oil tight seal. The caliper end can be the same or a banjo connector.
In easy fit the olive is built into the lever in some way (haven’t read up on caliper end). I presume you can get easy connect kits separate?
I have the post mount XT calipers and that was Jagwire kit HFA406. But suspect easy fit renders that unsuitable for the new flat mount versions. Plus I don’t think the flat mount are banjo fitting (post mount are)
Note what you’ve linked to includes the hydraulic hose pre filled. If you don’t want that it will be cheaper to buy the levers and calipers separately if getting hose and mineral oil separate anyway .