Home
Help
Search
Calendar
Login
Register
Yet Another Cycling Forum
»
Random Musings
»
DIY
»
Skip Bike and Bodge It
(Moderator:
Si
) »
Making a toilet roll holder from old forks
« previous
next »
Print
Pages: [
1
]
Author
Topic: Making a toilet roll holder from old forks (Read 7552 times)
The Family Cyclist
Making a toilet roll holder from old forks
«
on:
04 October, 2018, 06:18:43 pm »
We currently have no toilet roll holder. I've seen various ones on the interweb which hold one where the wheel would go. I live in a house with three females who use a ridiculous amount of big roll between them so trying to think of a solution that holds more but isn't just them on the steerer
Did just think studding into brake boss threads so can hold three with one in the wheel position
Logged
The Family Cyclist
Re: Making a toilet roll holder from old forks
«
Reply #1 on:
05 October, 2018, 06:47:37 am »
First thing I've discovered. A toilet roll does not fit between forks drop outs
Logged
PaulF
"World's Scariest Barman"
It's only impossible if you stop to think about it
Re: Making a toilet roll holder from old forks
«
Reply #2 on:
05 October, 2018, 06:57:01 am »
Tried a fat bike fork? But the biggest are 150mm, never measured the spacing of a toilet roll so don’t know if it would work
Logged
The Family Cyclist
Re: Making a toilet roll holder from old forks
«
Reply #3 on:
05 October, 2018, 01:54:15 pm »
Was hoping to make from items in the shed. Could try and splay the forks but they are inbred forks and very solid.
Logged
PaulF
"World's Scariest Barman"
It's only impossible if you stop to think about it
Re: Making a toilet roll holder from old forks
«
Reply #4 on:
05 October, 2018, 01:56:31 pm »
Probably easier to just trim down the toilet roll
But may be a hard sell to the ladies of the house
Logged
vorsprung
Opposites Attract
Re: Making a toilet roll holder from old forks
«
Reply #5 on:
05 October, 2018, 04:03:20 pm »
Standard width for front forks OLN is 100mm
Standard bog paper width is 4" or 101.6mm
But the situation is worse than that might suggest as the OLN distance is probably the widest point on the forks and there will not be room for a roll inside the forks above the dropouts
Logged
http://audaxing.wordpress.com
mastadon
Mr Larrington
A bit ov a lyv wyr by slof standirds
Custard Wallah
Re: Making a toilet roll holder from old forks
«
Reply #6 on:
07 October, 2018, 11:52:15 am »
A BMX fork might work.
Logged
External Transparent Wall Inspection Operative & Mayor of Mortagne-au-Perche
Satisfying the Bloodlust of the Masses in Peacetime
ElyDave
Royal and Ancient Polar Bear Society member 263583
Re: Making a toilet roll holder from old forks
«
Reply #7 on:
09 October, 2018, 11:33:58 am »
DIY shops sell bog roll holders, just sayin'
Logged
“Procrastination is the thief of time, collar him.” –Charles Dickens
The Family Cyclist
Re: Making a toilet roll holder from old forks
«
Reply #8 on:
09 October, 2018, 12:14:17 pm »
Not bike related ones Dave ;-)
Logged
Paul
L'enfer, c'est les autos.
Re: Making a toilet roll holder from old forks
«
Reply #9 on:
09 October, 2018, 01:23:56 pm »
Wonder how they got around the width problem
here
?
The fork looks splayed. Maybe a rear wheel QR?
Logged
What's so funny about peace, love and understanding?
Kim
Timelord
Re: Making a toilet roll holder from old forks
«
Reply #10 on:
09 October, 2018, 01:32:55 pm »
Recumbent rear fork, 135mm OLN. Not volunteering.
Alternatively, make like Burrows and embrace the cantilever...
Logged
Quote from: Wowbagger on 04 December, 2021, 10:26:59 pm
Kim, you are very bad!
Print
Pages: [
1
]
« previous
next »
Yet Another Cycling Forum
»
Random Musings
»
DIY
»
Skip Bike and Bodge It
(Moderator:
Si
) »
Making a toilet roll holder from old forks