Author Topic: Freeing up chain links after waxing  (Read 601 times)

Freeing up chain links after waxing
« on: November 29, 2020, 01:32:36 pm »
No..... not that sort of waxing .....
Lately I've been doing this
Perfectly SFW.... honest.

The only thing I have found to take issue with is the idea of freeing up the links by running them over a wooden knob   :o     
Minds out of the gutter please - 16:05 in the video.

I've found that takes the wax off the edges of the outer plates, which then go rusty.  So I came up with this:

recycling jockey wheels from dead RDs
and the tapered nuts from V-brake pads, as stand offs to keep the wheels away from the board.

The white flicks are tiny bits of solidified wax that come off the chain, and can be removed with a soft paint brush.




Pedal Castro

  • so talented I can run with scissors - ouch!
    • Two beers or not two beers...
Re: Freeing up chain links after waxing
« Reply #1 on: November 29, 2020, 02:59:28 pm »
Excellent idea, I must see if I have a couple of crap rear mechs around.