New cyclingling related project.
Materials: Aluminium scrap: micro-scooter handlebars, tent pole, angle, extruded bottom bar from a blind. Plus a joint from anglepoise lamp and a mouse mat.
Bought bits: a pair of truss couplers (stop giggling...)

I cur the bar from the blind into 600mm lengths, rounded the ends and marked the centres. Then bent it to a curve...

I filed down a M8 bolt and a couple of nuts to fit in the square hole in the anglepoise lamp joint, then hammered the tent pole ferrule square to fit in the other end - this enabled me to attach it to a truss coupler and change the angle. Mouse mat backing used to line the truss coupler.

More soon
Any guesses as to what it's for?