If you were really mad enough to want to experiment with this configuration I have a fork that would do the job (assuming you can convert from taper headset to straight 1 1/8"). It was sold to me as a sus-compensated 26" fork by PlanetX but is too short to be in place of a sus fork. Axle-crown 390 (or thereabouts, might be 395), offset about 45mm, lugs for front pannier frames and the crown drilling is right for a short reach brake with a 700c wheel. Only bad points, it's entirely alu (including steerer) and it's in France (and it has canti mounts for 26" wheels). Sitting in the garage taking up space, I was always thinking of fitting it to a suitable soot frame to make a sort of retake on a randonneuse.
( Can't think if the crown drilling is for allen bolt fixing brakes, probably not)