Yet Another Cycling Forum
General Category => The Knowledge => Topic started by: loz on 13 February, 2010, 05:50:44 pm
-
Hi all, I've never taken a head set apart before. One of the seals (above the crown race I believe) looks like it needs replacing - pic below.
Could anyone advise if I need to buy a new headset or could i buy an o-ring in the right size?
sorry if this is a stupid question, but I'm utterly inexperienced with headsets
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting (http://tinypic.com/r/2ahv490/6)
thanks in advance
loz
-
The seal is probably especially shaped for the particular bearing. You might get a spare from a dealer if very lucky.
It should be possible to use the headset without the seal if regularly serviced and protected with an external boot.
-
If you can ID which model it is (it looks like a Cane Creek headset) then there's lots of info about disassembly and spares here: Cane Creek Cycling Components :: Tech Center :: Headsets (http://www.canecreek.com/tech-headsets. ) You might be lucky and find there's nothing wrong with the seal.