Author Topic: ACME Grand 1000km 28 June 2018  (Read 16283 times)

jiberjaber

  • ... Fancy Pants \o/ ...
  • ACME S&M^2
Re: ACME Grand 1000km 28 June 2018
« Reply #225 on: June 12, 2018, 08:47:07 pm »
I've just noticed the 9:03 control closing time in Barry on Saturday morning. That means an earlier start from Port Talbot than I was hoping for. Boo.

Having done Stacey & Gavin (the reverse of Gavin & Stacey) last year it took me nearly 26 hours with no sleep stops and fresh legs before THOSE climbs, so the 0900 out of Barry is right on the limit for me.  I'm also planning to stop in Port Talbot and leave at first light (about 0300) with 3 hours to get to Barry (planned).
The route is flatter back from Barry, goes via the coast so you only have to do the Eglwysilan climb once, and even then it's the less steep side :)
Regards,

Jason

mmmmartin

  • BPB 1/1: PBP 0/1
    • FNRttC
Re: ACME Grand 1000km 28 June 2018
« Reply #226 on: June 13, 2018, 11:26:45 pm »
So it begins.
The pedals have been changed on the long distance audax bike.
I've thought about which socks to take, after reading Tom's very helpful account of his solo DIY.
I might actually have to start this ride.
Besides, it wouldn't be audacious if success were guaranteed.

Re: ACME Grand 1000km 28 June 2018
« Reply #227 on: June 15, 2018, 11:23:33 am »
This has rather crept up on me but my other activities have diverted me.

Put new tyres, chain and lower gear on the Audax bike last night.   Not ridden a gear that low for a while and it's very spinny.   It should help with the Forest of Dean and the Welsh mountains, though.

Will put a bit more prep time in next week.

wilkyboy

  • "nick" by any other name
    • 16-inch wheels
Re: ACME Grand 1000km 28 June 2018
« Reply #228 on: June 15, 2018, 11:34:36 am »
Not ridden a gear that low for a while and it's very spinny.   It should help with the Forest of Dean and the Welsh mountains, though.

Out of interest, how spinny?  I'm wavering towards gears, after my TINAT fail, as I now need this for RRTY, and both JJ and Tomsk's recent write-ups indicated the route feels hillier than online mapping would have us believe  ::-)
RRTY #6 done; #7 started.  Cambridge, innit

Re: ACME Grand 1000km 28 June 2018
« Reply #229 on: June 15, 2018, 11:42:32 am »
Not ridden a gear that low for a while and it's very spinny.   It should help with the Forest of Dean and the Welsh mountains, though.

Out of interest, how spinny?  I'm wavering towards gears, after my TINAT fail, as I now need this for RRTY, and both JJ and Tomsk's recent write-ups indicated the route feels hillier than online mapping would have us believe  ::-)

I've gone from 79" to 70".   I got round the last LEL on 70" and only walked one bit in the Howardian Hills and the cobbles in Alston.

Can always walk here and there.

wilkyboy

  • "nick" by any other name
    • 16-inch wheels
Re: ACME Grand 1000km 28 June 2018
« Reply #230 on: June 15, 2018, 12:33:28 pm »
Not ridden a gear that low for a while and it's very spinny.   It should help with the Forest of Dean and the Welsh mountains, though.

Out of interest, how spinny?  I'm wavering towards gears, after my TINAT fail, as I now need this for RRTY, and both JJ and Tomsk's recent write-ups indicated the route feels hillier than online mapping would have us believe  ::-)

I've gone from 79" to 70".   I got round the last LEL on 70" and only walked one bit in the Howardian Hills and the cobbles in Alston.

Can always walk here and there.

I had to walk a couple more, too — I'm heavier and less powerful than you are (and I was running 72-inches).
RRTY #6 done; #7 started.  Cambridge, innit

Re: ACME Grand 1000km 28 June 2018
« Reply #231 on: June 15, 2018, 01:04:46 pm »
Not ridden a gear that low for a while and it's very spinny.   It should help with the Forest of Dean and the Welsh mountains, though.

Out of interest, how spinny?  I'm wavering towards gears, after my TINAT fail, as I now need this for RRTY, and both JJ and Tomsk's recent write-ups indicated the route feels hillier than online mapping would have us believe  ::-)

I've gone from 79" to 70".   I got round the last LEL on 70" and only walked one bit in the Howardian Hills and the cobbles in Alston.

Can always walk here and there.

I had to walk a couple more, too — I'm heavier and less powerful than you are (and I was running 72-inches).

This was the 2013 version, though.   I was probably 10kg  heavier back then.   My fitness improvements have only really been in the last 2-3 years, when I got a bit more focused.    It won't last.

wilkyboy

  • "nick" by any other name
    • 16-inch wheels
Re: ACME Grand 1000km 28 June 2018
« Reply #232 on: June 15, 2018, 01:35:36 pm »
Not ridden a gear that low for a while and it's very spinny.   It should help with the Forest of Dean and the Welsh mountains, though.

Out of interest, how spinny?  I'm wavering towards gears, after my TINAT fail, as I now need this for RRTY, and both JJ and Tomsk's recent write-ups indicated the route feels hillier than online mapping would have us believe  ::-)

I've gone from 79" to 70".   I got round the last LEL on 70" and only walked one bit in the Howardian Hills and the cobbles in Alston.

Can always walk here and there.

I had to walk a couple more, too — I'm heavier and less powerful than you are (and I was running 72-inches).

This was the 2013 version, though.   I was probably 10kg  heavier back then.   My fitness improvements have only really been in the last 2-3 years, when I got a bit more focused.    It won't last.

Ah, I was on the Brompton for that one.  I walked the 1-in-6 after the hay-bale, but I think I rode everything else (I think).  I was 5kg lighter then than I am now, and quite a bit fitter. 

This discussion isn't helping ... actually, it is — it's looking more likely I'll be attempting this on gears  :facepalm:
RRTY #6 done; #7 started.  Cambridge, innit

Re: ACME Grand 1000km 28 June 2018
« Reply #233 on: June 15, 2018, 01:40:08 pm »
Not ridden a gear that low for a while and it's very spinny.   It should help with the Forest of Dean and the Welsh mountains, though.

Out of interest, how spinny?  I'm wavering towards gears, after my TINAT fail, as I now need this for RRTY, and both JJ and Tomsk's recent write-ups indicated the route feels hillier than online mapping would have us believe  ::-)

I've gone from 79" to 70".   I got round the last LEL on 70" and only walked one bit in the Howardian Hills and the cobbles in Alston.

Can always walk here and there.

I had to walk a couple more, too — I'm heavier and less powerful than you are (and I was running 72-inches).

This was the 2013 version, though.   I was probably 10kg  heavier back then.   My fitness improvements have only really been in the last 2-3 years, when I got a bit more focused.    It won't last.

Ah, I was on the Brompton for that one.  I walked the 1-in-6 after the hay-bale, but I think I rode everything else (I think).  I was 5kg lighter then than I am now, and quite a bit fitter. 

This discussion isn't helping ... actually, it is — it's looking more likely I'll be attempting this on gears  :facepalm:

I don't have the choice to take gears.   In my mind I had this down as one of the more relaxing weekends of the year given how much time I have spent beating myself up.    I have 2 hotel stops booked and aim to complete around the time the last PBP took me.

Then I got Tomsk's ride write up and the fear kicked in.

Re: ACME Grand 1000km 28 June 2018
« Reply #234 on: Today at 12:59:35 pm »
Are we on the final, final version of the routesheet ?

Was going to print it out and annotate this week.

jiberjaber

  • ... Fancy Pants \o/ ...
  • ACME S&M^2
Re: ACME Grand 1000km 28 June 2018
« Reply #235 on: Today at 01:07:34 pm »
Yes, unless Tomsk has arranged some other routecheck to be ridden and not told anyone, I think that is as it is.
Regards,

Jason