Yet Another Cycling Forum

General Category => The Knowledge => Topic started by: hellymedic on 18 May, 2017, 02:06:32 pm

Title: Product Warnings
Post by: hellymedic on 18 May, 2017, 02:06:32 pm
I have copied this from the Audax thread but I feel this issue needs wider attention.
Quote
This message was prepared by Ritchie Tout following an incident on the Bryan Chapman Memorial 600 k event May 2017.  If you're riding one, please check it out.  Note there is also a reference to a TREK headset at the end.  This was a separate incident.

"Advice re Specialized headshocks
 
I thought it was worth posting a note about an incident on last weekend’s BCM.  A rider discovered that her Specialized Ruby bike with a suspension system within the steerer meant that the steerer was not part of the fork.
 
The design is that the steerer slots into the fork crown and is held in place with a collar.  This collar is very thin and secured with a 4mm allen headed bolt.  All of this is hidden by a plastic cover with the allen bolt being accessed through the side of this.
 
It looks like it vibrated loose on the ride up to King’s but when she got there the bars no longer turned the fork. 
 
I have contacted Specialized but have not had a reply from them yet.  However, it is worth being aware of this problem as it is a system which is unique to Specialized and it is not obvious how it works – at least it wasn’t to us to start off with as nobody considered the possibility that the steerer column was not part of the fork.
 
I wonder whether AUK should keep a repository of incidents of this kind?  Had this rider crashed, I suspect anyone would have thought that the crash was what caused the loose steerer.
 
We also had a catastrophic failure of a Trek headset bearing.  The headset arrangement looked very flimsy in view of the forces transmitted through the headset bearings but it just splintered into several bits and left the bike unrideable."
 
 If you have one of these - do check it.  It may be a one - off or possibly more widespread, so collecting data is handy...
Title: Re: Product Warnings
Post by: Cudzoziemiec on 18 May, 2017, 02:20:09 pm
A 4mm bolt seems incredibly small for such a stressed and important part.
Title: Re: Product Warnings
Post by: T42 on 18 May, 2017, 03:52:48 pm
I have copied this from the Audax thread but I feel this issue needs wider attention.
Quote
We also had a catastrophic failure of a Trek headset bearing.  The headset arrangement looked very flimsy in view of the forces transmitted through the headset bearings but it just splintered into several bits and left the bike unrideable."

It would be nice to know which Trek(s).  ???
Title: Re: Product Warnings
Post by: aidan.f on 19 May, 2017, 08:16:57 am
Cycle  manufacturers  are  always looking for some feature  to  encourage you to part with  more  cash. Often with unforeseen consequences. Don't  expect them to change anything as a  result of  your observations, after all that  would  be  an admission of  liability.

There was a case of bars with decorative machined grooves , of course  they broke. Several riders  were  seriously  injured.

It came to a court case brought by  the  good old  CTC when they employed Chris Juden C.Eng. to look after us. in Then the  new  look Cycling UK  made  him  redundant. So now  it is  a case of buyer beware.
Title: Re: Product Warnings
Post by: robgul on 19 May, 2017, 08:44:32 am
A 4mm bolt seems incredibly small for such a stressed and important part.

4mm refers to the size of the hex wrench - that's pretty much the norm for all headset related bolts (the bolts could be oversize with a small head)   

As an example, some of the Scott bikes that we have in the shop have BIG bolts on the stem but are tightened with a 4mm hex wrench.

Rob
Title: Re: Product Warnings
Post by: Somnolent on 20 May, 2017, 11:38:42 am
I have copied this from the Audax thread but I feel this issue needs wider attention.
Quote
We also had a catastrophic failure of a Trek headset bearing.  The headset arrangement looked very flimsy in view of the forces transmitted through the headset bearings but it just splintered into several bits and left the bike unrideable."

It would be nice to know which Trek(s).  ???

If I remember correctly it was a white one  :P
Title: Re: Product Warnings
Post by: Torslanda on 21 May, 2017, 01:18:09 pm
Don't use a chocolate fire guard . . .
Title: Re: Product Warnings
Post by: Sergeant Pluck on 24 May, 2017, 08:21:32 pm
I have copied this from the Audax thread but I feel this issue needs wider attention.
Quote
This message was prepared by Ritchie Tout following an incident on the Bryan Chapman Memorial 600 k event May 2017.  If you're riding one, please check it out.  Note there is also a reference to a TREK headset at the end.  This was a separate incident.

"Advice re Specialized headshocks
 
I thought it was worth posting a note about an incident on last weekend’s BCM.  A rider discovered that her Specialized Ruby bike with a suspension system within the steerer meant that the steerer was not part of the fork.
 
The design is that the steerer slots into the fork crown and is held in place with a collar.  This collar is very thin and secured with a 4mm allen headed bolt.  All of this is hidden by a plastic cover with the allen bolt being accessed through the side of this.
 
It looks like it vibrated loose on the ride up to King’s but when she got there the bars no longer turned the fork. 
 
I have contacted Specialized but have not had a reply from them yet.  However, it is worth being aware of this problem as it is a system which is unique to Specialized and it is not obvious how it works – at least it wasn’t to us to start off with as nobody considered the possibility that the steerer column was not part of the fork.
 
I wonder whether AUK should keep a repository of incidents of this kind?  Had this rider crashed, I suspect anyone would have thought that the crash was what caused the loose steerer.
 
We also had a catastrophic failure of a Trek headset bearing.  The headset arrangement looked very flimsy in view of the forces transmitted through the headset bearings but it just splintered into several bits and left the bike unrideable."
 
 If you have one of these - do check it.  It may be a one - off or possibly more widespread, so collecting data is handy...

The quoted post reminded me of this:

http://www.cyclingweekly.com/news/racing/specialized-takes-blame-catastrophic-component-failure-caused-niki-terpstras-paris-roubaix-crash-325298

OK, the above article refers to a pre-production part, apparently, but it doesn’t inspire confidence. My impression is that this seems to be a system that needs very careful assembly due to being possibly a bit close to the edge in terms of safely margins.
Title: Re: Product Warnings
Post by: gene hunt on 12 June, 2017, 12:05:14 am
I was in my LBS last week looking at a new Roubaix and shocked at how complex the set up is.

Doubt I would be happy riding it.

Title: Re: Product Warnings
Post by: Alex B on 10 January, 2019, 08:20:46 pm
I have copied this from the Audax thread but I feel this issue needs wider attention.
Quote
This message was prepared by Ritchie Tout following an incident on the Bryan Chapman Memorial 600 k event May 2017.  If you're riding one, please check it out.  Note there is also a reference to a TREK headset at the end.  This was a separate incident.

"Advice re Specialized headshocks ...

<snip/>


Note Speclalized have just issued a recall notice (https://bikerumor.com/2019/01/09/specialized-announces-steerer-tube-collar-recall-for-roubaix-ruby-diverge-sirrus/) for many of these "future shock" steerer arrangements.
Title: Re: Product Warnings
Post by: LittleWheelsandBig on 07 February, 2021, 03:37:59 pm
On topic, though nothing to do with Specialized Headshocks.

Birzman has recalled their Pump Up tubeless inflators sold 2017-2020. http://www.birzman.com/news_detail.php?cID=3&Key=120 Of course, I have one of them from Tredz. I would have thought that Tredz would filter through their records to contact customers who purchased them but obviously they are relying on folk hearing about the recall by osmosis.
Title: Re: Product Warnings
Post by: LittleWheelsandBig on 04 March, 2021, 02:47:17 pm
Brompton are recalling recent e-Bromptons for a firmware update. Apparently they can keep powering on when the rider stops pedalling. https://www.brompton.com/recall
Title: Re: Product Warnings
Post by: Redlight on 04 March, 2021, 04:20:23 pm
Brompton are recalling recent e-Bromptons for a firmware update. Apparently they can keep powering on when the rider stops pedalling. https://www.brompton.com/recall

Thanks LWaB.  Mrs R's Christmas present will have to go back to Santa  :'(
Title: Re: Product Warnings
Post by: Hot Flatus on 04 March, 2021, 05:27:30 pm
Anybody got a Canyon with carbon bars?

  :-X :-X :-X

Title: Re: Product Warnings
Post by: lissotriton on 27 September, 2021, 06:06:01 pm
Smyths Toys, mixing up brake cable and gear cable housing?
https://www.smythstoys.com/uk/en-gb/Product-Information
Title: Re: Product Warnings
Post by: Kim on 27 September, 2021, 07:50:02 pm
Smyths Toys, mixing up brake cable and gear cable housing?
https://www.smythstoys.com/uk/en-gb/Product-Information

I'm surprised it fits.  I've used brake housing for gear inners in a few places (friction shiters and shifter-controlled brakes), but never thought to see if the other way would work.  Cheap cable and a toyshop monkey doing the fitting probably helps.
Title: Re: Product Warnings
Post by: Wowbagger on 17 June, 2022, 07:27:14 pm
Islabikes safety warning:

https://www.islabikes.co.uk/pages/safety-notice-june-2022
Title: Re: Product Warnings
Post by: LittleWheelsandBig on 17 June, 2022, 07:33:45 pm
Another Brompton electric recall, but only in North America
https://www.cpsc.gov/Recalls/2022/Brompton-Bicycle-Recalls-Foldable-Electric-Bicycles-Due-to-Crash-and-Injury-Hazards
Title: Re: Product Warnings
Post by: LittleWheelsandBig on 27 June, 2022, 12:14:57 pm
New model Brompton front axle QR nuts need to be changed apparently.

https://www.brompton.com/p-line-wheel-nut-update