Yet Another Cycling Forum

General Category => The Knowledge => Topic started by: telstarbox on 25 April, 2021, 11:34:24 am

Title: Wahoo out front mount
Post by: telstarbox on 25 April, 2021, 11:34:24 am
I've put the out front mount onto Mrs T's bike but the bars are way thinner than the tightest setting.

For now I've bodged some Blutack in but would some thin rubber shim be a better fix?
Title: Re: Wahoo out front mount
Post by: quixoticgeek on 25 April, 2021, 12:08:00 pm
I've put the out front mount onto Mrs T's bike but the bars are way thinner than the tightest setting.

For now I've bodged some Blutack in but would some thin rubber shim be a better fix?

Isn't this what bits of old inner tube are for?

J
Title: Re: Wahoo out front mount
Post by: jsabine on 25 April, 2021, 03:47:53 pm
I've put the out front mount onto Mrs T's bike but the bars are way thinner than the tightest setting.

For now I've bodged some Blutack in but would some thin rubber shim be a better fix?
Isn't this what bits of old inner tube are for?

Or strips of beer/coke can (sorry, anodised flexible alloy shim stock).

But if these bars are 'way thinner' is that a case of standard bars and an oversize mount? I'd have expected either there to be an option at purchase to choose sizes, or for the oversize mount to come with a plastic shim.
Title: Re: Wahoo out front mount
Post by: robgul on 25 April, 2021, 04:18:54 pm
I've put the out front mount onto Mrs T's bike but the bars are way thinner than the tightest setting.

For now I've bodged some Blutack in but would some thin rubber shim be a better fix?
Isn't this what bits of old inner tube are for?

Or strips of beer/coke can (sorry, anodised flexible alloy shim stock).

But if these bars are 'way thinner' is that a case of standard bars and an oversize mount? I'd have expected either there to be an option at purchase to choose sizes, or for the oversize mount to come with a plastic shim.

Use Diet Coke can to save weight ;D     - but inner tube strip will be better and less likely to slip
Title: Re: Wahoo out front mount
Post by: telstarbox on 25 April, 2021, 07:20:03 pm
I haven't had a puncture for years so no old tubes handy, but I could always sacrifice a new one? ;) Will try that though cheers.

As far as I know it's the default mount which came in the box, I was a bit surprised as the bike is a Decathlon hybrid so the bars are about as conventional as they could be. There's a good 10mm of spare space.
Title: Re: Wahoo out front mount
Post by: Lightning Phil on 25 April, 2021, 07:32:31 pm
Old bits of clothing or cloth, spare bit of bar tape? Plenty of things can be used as long as they don’t disintegrate in the rain.