Author Topic: Show us your PBP setup  (Read 4272 times)

Re: Show us your PBP setup
« Reply #50 on: August 15, 2019, 08:43:54 pm »

Another set of beautifully-aligned ‘guards.

Yet the picture does not reveal the noise one of those cranks was emitting during Kristiansand #1 ... which i’m sure is all resolved now.

Re: Show us your PBP setup
« Reply #51 on: August 15, 2019, 09:17:02 pm »
Sorry, no flaps

Sent from my LLD-L31 using Tapatalk


Zed43

  • prefers UK hills over Dutch mountains
Re: Show us your PBP setup
« Reply #52 on: August 16, 2019, 06:04:18 am »


Yet the picture does not reveal the noise one of those cranks was emitting during Kristiansand #1 ... which i’m sure is all resolved now.
It is The splines in the left crank arm had worn out, resulting in play on the axle.

Excellent customer service from Quarq USA, although the crankset was already out of warranty they sent me a pair of "blemished" crank arms (sans spider obviously) even paying for shipping. Blemished meaning there's a small dull spot in the paint on de inside of one of the cranks.

For good measure I also put in a new bottom bracket. It's all good now and since I no longer have a reason to swap the cranks between bike I'm confident it'll stay put.

Re: Show us your PBP setup
« Reply #53 on: August 16, 2019, 01:46:30 pm »
Just finished fettling mine, mid-camping in the Loire. New wheels, courtesy of Pete Matthews, new cassette and chain. Just need to add guards, bidons and lights.

Sent from my Pixel 3a using Tapatalk