Removed three thorns from the front tyre of Mlle PB's tourer and restored wheel to good health.
Fitted a shorter B&M front lamp bracket to Mlle PB's tourer thus lowering her front lamp slightly reducing obstruction when barbag in place.
Re-fettled the rear lamp on my audax machine as it had developed a dodgy connection (again).
Spent an inordinate amount of time getting my Crapag rear 9 to work across all nine once again. It likes to default to eight, skipping the smallest but one in the process. This is the year when I abandon the Crapag experiment and revert back to reliable and predictable Shimano loveliness. I like Crapag ergos but I loathe things that just don't work properly. No debate necessary
Fitted the Pixeo auto to Mlle PB's audax machine replacing her rear mudguard reflector with the new lamp.
General check over and lube job on both audax machines.
Made a list of the pre-disposal fettling to be done to the four machines which have been designated surplus to requirements.
Made a list of all less-urgent fettling required for audax and touring machines.
Time for coffee...