Author Topic: SKS Chromo Plastic Mudguards fitting  (Read 2801 times)

SKS Chromo Plastic Mudguards fitting
« on: March 09, 2011, 08:04:20 pm »
Hi, I'm just fitting a pair of SKS Plastic Mudguards onto my Audax steed.

Just noticed that the end caps ( black plastic ) X2 are missing.

Does it matter if I leave them off, or rob the ones on the rear guard and place them on the front.

The old ESGE guards did not have this set up, do they matter.

Thanks

MJ
Mad Jacks JSM event 2.25 AAA (2250 mts) - 23/2/2019 entries open 26/12/2019 http://www.aukweb.net/events/detail/19-85/

Fixedwheelnut

  • "If it ain't fixed it's broken"
    • My photos
Re: SKS Chromo Plastic Mudguards fitting
« Reply #1 on: March 09, 2011, 11:10:55 pm »
Doesn't really matter its just to stop you scratching yourself on sharp stays, I always used to file mine down anyway so they were smooth.
 I have seen others use short legths of vaccumn pipe and a drop from a glue gun in the end.  :)
"Don't stop pedalling"

Re: SKS Chromo Plastic Mudguards fitting
« Reply #2 on: March 10, 2011, 06:13:15 pm »
Doesn't really matter its just to stop you scratching yourself on sharp stays, I always used to file mine down anyway so they were smooth.
 I have seen others use short legths of vaccumn pipe and a drop from a glue gun in the end.  :)

OK thanks, maged to source some in the end.

Cheers,

MJ :thumbsup:
Mad Jacks JSM event 2.25 AAA (2250 mts) - 23/2/2019 entries open 26/12/2019 http://www.aukweb.net/events/detail/19-85/