Top right [ mode] button
Bottom right [ +] button
Bottom left [-] Button
Top left [ select] button
How to Setup the Time
Check the Mode Indicator Bar. If the mode arrow is not on TIME, PRESS the [Mode] button until the
arrow is directly below TIME on the bar.
To setup the Time:
1. PRESS the [Select] button and hold for 2 seconds. Located in Field 3, the seconds will begin to flash.
2. PRESS the + button to scroll the seconds upward or
PRESS the [-] button to reset the seconds to zero.
3. At the seconds desired, PRESS the [Select] button to move to the next setting. Located on right of
Field 2, the minutes will begin to flash.
4. PRESS the + button to scroll the minutes upward or
PRESS the [-] button to scroll the minutes downward.
5. At the minutes desired, PRESS the [Select] button to move to the next setting. Located in the center of
Field 2, the hour will begin to flash.16
6. PRESS the + button to scroll the hour upward or
PRESS the [-] button to scroll the hour downward.
7. At the hour desired, PRESS the [Select] button to move to the next setting. Located in Field 1, the 24
or 12 hour clock setting will begin to flash.
8. PRESS either the + or the [-] button to toggle between the 24hr and 12hr.
Note: if the 12 hour clock is chosen either AM/PM will appear below the hour in Field 2.
9. At the clock setting desired, PRESS the [Select] button to move to the next setting. Located in the
center of Field 2, the year will begin to flash.
10.PRESS the + button to scroll the year upward or
PRESS the [-] button to scroll the year downward.
11.At the year desired, PRESS the [Select] button to move to the next setting. Located in the center of
Field 3, the month represented by a number will begin to flash.
12.PRESS the + button to scroll the month upward or
PRESS the [-] button to scroll the month downward.
13.At the month desired, PRESS the [Select] button to move to the next setting. Located to the right of
Field 3, the date will begin to flash.
14.PRESS the + button to scroll the date upward or
PRESS the [-] button to scroll the date downward.
Note: Once the user has determined the year, month and day, the Wristop Computer will supply the day
of the week in Field 1.
15.At the desired date, PRESS the [Mode] button to accept the changes and return to the main mode.
Note: If the user does not press any button for 1 minute in the setup mode, the display will automatically
exit setup.
Setting the time is now complete.