I have a nice set of very lightweight wheels, fitted with a Shimano freehub.
However, I'm considering fitting them onto my Campag equipped bike. I'm aware though, of the slightly different spacings between cassette brands.
Now I'm well aware of replacement freehubs, Travel agents, clamping bodges and even special cassettes with Shimano splines and Campag spacings, but I've been considering another solution instead.
If I take a Shimano cassette, put all the spacers aside and replace the spacers with a set from an old Campag cassette of the same speed, I'm thinking that it should work.
To clarify. Using Shimano sprockets on a Shimano freehub, but with Campag spacers. Ten speed cassette, with ten speed levers.
Obviously, some of the lugs on the plastic spacers would need modifying with a file but this is very easy to do.
Anyone tried this before ? Is there some problem that I've not considered which would make this unworkable?