How noticeable is the effect? I guess Bullits are stiffer than my Bakfiets, but even at 200+ kg AUW, I've not noticed any steering weirdness under braking. (I suppose the rollerbrakes are going to impose lower braking loads, and what steering effects there may be are probably lost in the general torsional flex when heavily laden...)
Pretty noticeable. Enough to scare the crap out of me when it first happened. (I had 2 fall due to spd unclipping errors during my 1st shift).
if there is the slightest free play in the headset then the fork will deflect significantly when the brake is applied and this will cause the steering to move. This will happen at relatively low braking loads, so ought to be easy to distinguish from a lack of bending stiffness in the fork or the frame.
It has been my observation that the steering linkage is often mounted part way down the fork in bikes of this type, and the head tube is very short, which means that any free play in the headset is exaggerated in terms of movement in the steering linkage.
I'll check the headset when I'm next at the office. I've seen at least one other bike there which had a loose headset, so it may effect more of them.
H . E . F . T . Y
I'm trying a modified Emily Chappell TCR training plan. It's only 30-40k per shift (plus the 20k round trip commute), but with the weight of the bikes, and the winds, it's a bit like an interval training session. Also a great bike handling test, esp as you can't see the front wheel position, so you have to be read the road more than you might otherwise.
Getting back on my race bike at the end of the shift to cycle home is quite a shock...
J