I've just purchased a new Maxx-D mk4 and a second spare smart-charger from Wiggle.
( So I can have a charger both at home and at work. )
It's been charged, and used, once.
And very nice it is.
The second charger behaved slightly oddly when plugged in to the mains.
The green LED on the charger pulsed bright then dim about once per second.
When I plugged it into the light, the button/light on the Maxx-D did not flash as expected to indicate charging.
But the main white LEDs flashed at about one flash per second.
That seemed wrong, so I un-plugged the charger.
Now the Maxx-D won't switch on.
Totally dead.
I put a volt-meter on the output of the suspect charger, and it's pulsing to over 10 volts.
It looks like a faulty charger has killed the light.
I know my legal recourse is against wiggle, but I thought I'd try Exposure's customer support in the first instance, and so I've e-mailed their support address. I was greatly encouraged by the following commendation from a member of this parish, on their service & warranty page:
"I am continually delighted with Exposure's products and customer service and will spread the word among the thousands of cyclists I mix with at yacf.co.uk"
Lester, High Wycombe
We'll see how it pans out.
--
Ron